Installation

1

Installation photo #1
  • Put on your helmet and position your goggle strap to desired location and adjust the strap tension
  • Carefully remove helmet, preserving goggle strap positioning

2

Installation photo #2
  • Align circumference of strap positioning on helmet
  • Slide each Goggle Grip® under strap to desired mounting location

3

Installation photo #3
  • Take four strips of masking tape (2" long) & place above and below strap placement at the front of each Goggle Grip®, marking strap alignment and mounting location

4

Installation photo #4
  • Flip Goggle Grip® upside down while attached to strap
  • Take supplied alcohol prep pad and Wipe down mounting location
  • Let dry 3-5 minutes

5

Installation photo #5
  • Peel back red release tape
  • Carefully flip Goggle Grip® right-side up holding Goggle Grip® and strap above Mounting area
  • Caution: Do not touch prepped mounting surface with fingers
  • Once aligned with masking tape reference, place Goggle Grip® on mounting surface

6

Installation photo #6
  • Important- Firmly press against adhesive contact area for optimum adhesion to helmet
  • Requires a minimum of 24 hours setup time (65-95 degrees)